More Info on Christmas Light Installation

When they start to think about installing their Christmas lights for the season, countless people get nervous. It’s always a job left as late as possible, and every day when the weather gets colder and wetter. This doesn’t need to be a chore. Here are a few tips from an installation expert who has his own Vancouver, Canada-based Christmas light installation company. Dallas Christmas Lights offers excellent info on this.

Using a wire tacker instead of a regular stapler if you plan to staple your lights in your home. The protective coating would be cut off by regular staples, potentially damaging the wires, and increasing the chances of a short circuit. Staples of the wire tacker are mostly u-shaped and leave a small gap for the wire cable, ensuring that the wires stay in good condition. From either side of the light, staple the wire around 1. “This will make sure it sticks out straight and all the lights look the same, offering a much neater look when the job is done.

Go a few feet around the sides of the building as you string your lights around the roof. This offers a much cleaner look.

Use non-invasive clips if you choose not to leave staple marks in your house. They are clear, affordable, and quickly and easily clip lights onto gutters or under shingles. For each light bulb, you’ll need one.

Do not staple or hang them pointing up while hanging lights, if at all possible. Water can get in, probably shortening the light. Instead, point them outward or down.

To seal the male / female plugs together between each strand, use electrical tape. This will keep out water and ensure that your lights remain bright during the season.

Use a quality painting pole with a hook attached to the end when hanging lights on trees. I purchased a small inexpensive paint roller that screws on to the end of the pole. I cut off the roller, and twisted the wire into a “V”. It works fine. I tried to use real “Christmas light hanging sticks” sold in shops, but they are easily made, twisted or damaged quite cheaply, and when the pole gets wet, don’t.

Mini-light wrapping trunks can look great, particularly with a spacing of about 4′, but takes a lot of lights. Wrap your strands in a ball as you do this, and move it on to yourself across the trunk, slowly unravelling as you go.

It can be risky to operate using ladders. I heard a lot of horror storeys, especially around the time of Christmas. I follow this easy, but powerful rule and countless times it has saved my life: “If you’re even thinking about falling while doing a job, don’t do it!” It’s not worth hanging any lights alone. The holidays are about being with relatives, not making your house on the block stand out the most.

Call a professional Christmas light installer if you’re either nervous or don’t have the time to hang your own lights. They’re doing it easier, faster, and the job’s going to look better, too.